Skip to content Skip to sidebar Skip to footer

Shop


Category +

Base polymer +

Fillers/Reinforcements +

Chemical-physical properties +

Functional properties +

Mechanical properties +

Thermal properties +

3D Printing +

"Green" version +

Suitability +

Showing all 68 results

  • LAPEX A AM F1

    PES (Polyetheresulfone) | Compound for FFF and FGF 3D printing | High temperature resistant | Self-extinguishing | Suitable for food contact | Colourable

    $1.00
  • LAPEX A AM K/20

    PES (Polyetheresulphone) reinforced carbon fibre | Compound for FFF and FGF 3D printing | Structural | High temperature resistant | Antistatic | Self-extinguishing

    $1.00
  • LARTON AM E

    PPS (Polyphenylene Sulphide) | Compound for FFF 3D printing | High temperature resistant | Self-extinguishing | Chemically resistant

    $1.00
  • LARTON AM K/10

    PPS (Polyphenylene Sulphide) reinforced carbon fibre | Compound for FFF and FGF 3D printing | Structural | High temperature resistant | Self-extinguishing | Antistatic | Chemically resistant

    $1.00
  • LARTON AM K/15

    PPS (Polyphenylene Sulphide) reinforced carbon fibre | Compound for FFF and FGF 3D printing | Structural | High temperature resistant | Self-extinguishing | Antistatic | Chemically resistant

    $1.00
  • LARTON AM K/30

    PPS (Polyphenylene Sulphide) reinforced carbon fibre | FGF 3D printing compound | Structural | High temperature resistant | Self-extinguishing | Antistatic | Chemically resistant

    $1.00
  • LASTANE 50 AM

    TPU (Polyurethane) | Compound for FFF 3D printing | Maximum resilience | Colourable

    $1.00
  • LASTANE 50 AM K/20

    TPU (Polyurethane) reinforced carbon fibre | Compound for FFF 3D printing | Structural | Antistatic

    $1.00
  • LASTILAC AM

    ABS (Acrylonitrile Butadiene Styrene) standard | Compound for FFF 3D printing | Colourable

    $1.00
  • LASTILAC AM MDT05-01

    ABS (Acrylonitrile Butadiene Styrene) filled with metal detectable fillers | FFF 3D printing compound | metal detectable

    $1.00
  • LASTILAC RT AM K/10

    ABS (Acrylonitrile Butadiene Styrene) reinforced carbon fibre | Compound for FFF 3D printing | Structural | Antistatic

    $1.00
  • LASTILAC S AM

    ASA (Acrylonitrile Styrene Acrylate) standard | Compound for FFF and FGF 3D printing | UV stable | Colourable

    $1.00
  • LASTILAC S AM G/10

    ASA (Acrylonitrile Styrene Acrylate) reinforced with glass fibre | Compound for FFF and FGF 3D printing | Engineering | Improved mechanics | UV stable | Colourable

    $1.00
  • LASTILAC S AM K/10

    ASA (Acrylonitrile Styrene Acrylate) carbon-fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic | UV-stable

    $1.00
  • LATAMID 12 AM H2 G/10

    PA12 (Polyamide 12) glass fibre reinforced | Compound for FFF and FGF 3D printing | Engineering | Improved mechanics | Low moisture absorption | Chemically resistant | Colourable

    $1.00
  • LATAMID 12 AM H2 K/05

    PA12 (Polyamide 12) carbon fibre reinforced | Compound for FFF and FGF 3D printing | Engineering | Improved mechanics | Low moisture absorption | Chemically resistant

    $1.00
  • LATAMID 12 AM H2 K/15

    PA12 (Polyamide 12) carbon fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic | Low moisture absorption | Chemically resistant

    $1.00
  • LATAMID SP1 AM K/15

    PA6.10 (Polyamide 6.10) carbon fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic | Low moisture absorption

    $1.00
  • LATAMID SP1 AM S/10

    PA6.10 (Polyamide 6.10) glass sphere filled | Compound for FFF and FGF 3D printing | Engineering | Low moisture absorption | Dimensionally stable | Wear-resistant | Colourable

    $1.00
  • LATAMID SP4 AM MK/15

    PA6.66 (modified copolymer polyamide) reinforced short carbon fibre | Compound for FFF and FGF 3D printing | Engineering | Dimensionally stable | Aesthetic | Sandable

    $1.00
  • LATENE EP 3 AM K/20

    PP (Polypropylene) carbon-fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic | Non-hygroscopic | Chemically resistant | Low temperature resistant

    $1.00
  • LATENE EP 3 AM M/20

    PP (Polypropylene) loaded with short glass fibre | Compound for FFF and FGF 3D printing | Engineering | Non-hygroscopic | Chemically resistant | Low temperature resistant | Colourable

    $1.00
  • LATER G AM

    PETg (polyethylene terephthalate-glycol) standard | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATER G AM K/10

    PETg (polyethylene terephthalate-glycol) carbon-fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic

    $1.00
  • LATER G AM MDT05-01 F1

    PETg (Polyethylene Terephthalate Glycol) filled with reprocessable fillers | FFF 3D printing compound | Metal Detectable | Suitable for food contact

    $1.00
  • LATER G AM UVH TES/10

    PETg (polyethylene terephthalate-glycol) with mineral fillers | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Aesthetic and colourable | Improved dimensional stability

    $1.00
  • LATER G AM-V0HF

    PETg (Polyethylene Terephthalate Glycol) with halogen-free self-extinguishing additive | Compound for FFF and FGF 3D printing | Self-extinguishing V0 | Colourable

    $1.00
  • LATER G AM-V0HF U6

    PETg (Polyethylene Terephthalate Glycol) with halogen-free self-extinguishing additive | Compound for FFF and FGF 3D printing | Self-extinguishing V0 | UV-stabilised | Colourable

    $1.00
  • LATER G HT AM

    PETg (polyethylene terephthalate-glycol) with improved heat resistance | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATER G HT AM F1

    PETg (Polyethylene Terephthalate Glycol) with improved heat resistance | Suitable for food contact | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATER G HT AM K/10

    PETg (polyethylene terephthalate-glycol) reinforced with carbon fibre | Compound for FFF and FGF 3D printing | Structural | Antistatic | Improved thermal resistance

    $1.00
  • LATER G HT AM K/15

    PETg (polyethylene terephthalate-glycol) reinforced carbon fibre | Compound for FFF and FGF 3D printing | Structural | Antistatic | Improved thermal resistance

    $1.00
  • LATER G HT1 AM

    PETg (polyethylene terephthalate-glycol) with improved heat resistance | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIBLEND 7587 AM

    Blend PC/PBT (Polycarbonate/Polybutylene terephthalate) | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIBLEND 7587 AM K/10

    Carbon fibre reinforced PC/PBT (Polycarbonate/Polybutylene terephthalate) blend | Compound for FFF and FGF 3D printing | Structural | Antistatic

    $1.00
  • LATIBLEND 7587 AM MK/15

    PC/PBT (Polycarbonate/Polybutylene terephthalate) blend reinforced with short carbon fibre | Compound for FFF and FGF 3D printing | Improved aesthetics

    $1.00
  • LATICONTHER SP4 AM CP1/30

    PA6.10 (Polyamide 6.10) filled with ceramic fillers | Compound for FFF and FGF 3D printing | Thermally conductive | Electrically insulating

    $1.00
  • LATIECO 7587 MR AM UV K/30 E

    Partially recycled, carbon-fibre reinforced PC/PBT (polycarbonate/polybutylene terephthalate) blend | FGF 3D printing compound | Structural | Antistatic | UV-stabilised

    $1.00
  • LATIECO 77 MR AM A

    rPETg (polyethylene terephthalate-glycol) standard 100% recycled | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIECO 77 MR AM K/10 A

    rPETg (polyethylene terephthalate-glycol) 100% recycled carbon fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic

    $1.00
  • LATIECO 7787 MR AM UV A

    PETg/rPC (polyethylene terephthalate-glycol/polycarbonate) blend 100% recycled | Compound for FFF and FGF 3D printing | UV-stabilised | Colourable

    $1.00
  • LATIECO 87/24 MR AM A

    rPC (Polycarbonate) standard 100% recycled | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIECO 87/24 MR AM UV V0 A

    rPC (Polycarbonate) 100% recycled with self-extinguishing additive | Compound for FFF and FGF 3D printing | Self-extinguishing | UV-stabilised | Colourable

    $1.00
  • LATIGEA B20 AM

    PLA (Polylactic Acid) standard 100% biobased | Compound for FFF and FGF 3D printing | Good transparency | Colourable

    $1.00
  • LATIGEA B20 AM M9

    PLA (Polylactic Acid) biobased | Compound for FFF 3D printing | Optimised for fast printing | Colourable

    $1.00
  • LATIGEA B20 AM UVH

    PLA (polylactic acid) biobased | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Improved heat resistance after annealing | Colourable

    $1.00
  • LATIGEA B20 AM UVH L10/15

    Biobased PLA (polylactic acid) filled with wood flour | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Wood effect | Improved heat resistance after annealing

    $1.00
  • LATIGEA B20 AM UVH MK/10

    PLA (polylactic acid) biobased carbon-fibre reinforced | Compound for FFF 3D printing | Structural | Antistatic | UV-stabilised

    $1.00
  • LATIGEA B20 AM UVH TES/10

    PLA (polylactic acid) biobased with mineral fillers | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Aesthetic and colourable | Improved heat resistance after annealing

    $1.00
  • LATIGEA B20 AM UVHE92 K/15

    PLA (polylactic acid) biobased carbon-fibre reinforced | Compound for FFF 3D printing | Structural | Antistatic | UV-stabilised

    $1.00
  • LATIGRAY 77-01 AM MDT05-03 MF1

    PETg (Polyethylene terephthalate-glycol) filled with metal detector- and RX-releasable fillers| FFF 3D printing compound | metal detectable | radiopaque | suitable for food contact

    $1.00
  • LATIGRAY B01-01 AM CX/35 F1

    PLA (Polylactic Acid) biobased filled with X-ray detectable filler | FFF 3D printing compound | Radiopaque | suitable for food contact

    $1.00
  • LATIGRAY B01-01 AM CX/70 F3

    Bio-based PLA (Polylactic Acid) loaded with X-ray detectable filler | Compound for FFF 3D printing | High radiopacity | suitable for medical applications

    $1.00
  • LATILON 28 AM

    PC (Polycarbonate) standard | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATILON 28 AM MK/20

    PC (Polycarbonate) reinforced short carbon fibre | Compound for FFF and FGF 3D printing | Improved aesthetics

    $1.00
  • LATILON 28 AM-V0

    PC (Polycarbonate) with self-extinguishing additives | Compound for FFF and FGF 3D printing | Self-extinguishing | UV-stabilised | Colourable

    $1.00
  • LATILUB 35 AM Y/05

    ASA (Acrylonitrile Styrene Acrylate) with aramid fibre additive | FFF 3D printing compound | Self-lubricating

    $1.00
  • LATILUB 36 AM Y/05

    ABS (Acrylonitrile Butadiene Styrene) with aramid fibre additive | FFF 3D printing compound | Self-lubricating

    $1.00
  • LATILUB 77 AM 10T

    PETg (Polyethylene terephthalate-glycol) additivated PTFE | Compound for FFF 3D printing | Self-lubricating

    $1.00
  • LATILUB 87/28 AM 20T

    PC (Polycarbonate) with PTFE additive | Compound for FFF 3D printing | Self-lubricating

    $1.00
  • LATILUB B01 AM-02S

    PLA (Polylactic acid) biobased with silicone lubricant | Compound for FFF 3D printing | Self-lubricating | Colourable

    $1.00
  • LATIOHM 35-01 AM CNT

    ASA (Acrylonitrile Styrene Acrylate) with Carbon Nanotube Additive | FFF 3D Printing Compound | Electrically Conductive | UV Stable

    $1.00
  • LATIOHM 36-08 AM PD02

    ABS (Acrylonitrile Butadiene Styrene) with permanent anti-static additives | Compound for FFF 3D printing | Antistatic | Colorable

    $1.00
  • LATIOHM 77-01 AM CNT

    PETg (Polyethylene Terephthalate-Glycol) Additivated Carbon Nanotubes | Compound for FFF 3D Printing | Electrically Conductive

    $1.00
  • LATIOHM 77-09 AM PD02 M/10

    PETg (polyethylene terephthalate-glycol) modified with permanent antistatic additives and reinforced short glass fibre | Compound for FFF 3D printing | Antistatic | Colourable

    $1.00
  • LATIOHM 92-02 AM PD09 F3

    TPU (Polyurethane) additivated with Conductive Carbon | Compound for FFF 3D printing | Electrically Conductive | High resilience | Suitable for medical applications

    $1.00
  • LATIOHM B61-01 AM CNT

    PLA (Polylactic Acid) biobased modified and additivated with Carbon Nanotubes | Compound for FFF 3D printing | Electrically Conductive

    $1.00
  • LATISTAT 87/28-06 AM

    PC (Polycarbonate) additivated Conductive carbon | Compound for 3D printing FFF | Antistatic

    $1.00

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds