LATI3Dlab

Close

Black plastic pellets on a white background, used for various processing and manufacturing projects.

LATIBLEND 9590 AM K/20

$1.00

LATIBLEND 9590 AM K/20 is a technical compound based on a PSU/PPO blend (Polysulfone/Polyphenylene Oxide) reinforced with 20% carbon fiber. Hydrolysis-resistant, it offers excellent mechanical properties, antistatic performance (for ATEX environments), outstanding dimensional stability, and high thermal resistance. Optimized for direct pellet-fed (FGF) 3D printing.

Base polymer PSU/PPO

Fillers/Reinforcements Carbon fibers

Mechanical properties High mechanical properties

Chemical-physical properties Non-hygroscopic, Hydrolysis resistant

Thermal properties Improved thermal resistance

“Green” version On polymer partly recycled

3D Printing Only for direct printing from granule, Good dimensional stability, Suitable for post-processing/sandable

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 100°C

3D printing conditionsExtruder temperature: 280°C – 320°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF

Available Colors

SKU: 55599AA Categories: Electrically conductive/antistatic, Plastic granules for 3D printing, Structural Product ID: 27489

Description

LATIBLEND 9590 AM K/20 is a technical compound based on a PSU/PPO blend (Polysulfone/Polyphenylene Oxide) reinforced with 20% carbon fiber. Hydrolysis-resistant, it offers excellent mechanical properties, antistatic performance (for ATEX environments), outstanding dimensional stability, and high thermal resistance. Optimized for direct pellet-fed (FGF) 3D printing.

Base polymer PSU/PPO

Fillers/Reinforcements Carbon fibers

Mechanical properties High mechanical properties

Chemical-physical properties Non-hygroscopic, Hydrolysis resistant

Thermal properties Improved thermal resistance

“Green” version On polymer partly recycled

3D Printing Only for direct printing from granule, Good dimensional stability, Suitable for post-processing/sandable

Functional properties Antistaticity (ATEX)/ Electrical conductivity

Granule drying conditions 100°C

3D printing conditionsExtruder temperature: 280°C – 320°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF

Available Colors

Additional information

Disponibile in	Anthracite
Polimero base	PSU/PPO
Filler/rinforzi	Carbon fibers
Proprietà termiche	High thermal resistance
Proprietà fisiche	Hydrolysis resistant, Non-hygroscopic
Proprietà meccaniche	High mechanical properties
Proprietà funzionali	Antistaticity (ATEX)/ Electrical conductivity
Stampa 3D	Suitable for post-processing/sandable, Good dimensional stability, Only for direct printing from granule
Categoria	Electrically conductive/antistatic, Structural

RequestDataSheet