Skip to content Skip to footer

LATIECO 77 MR AM K/10 A

$1.00

LATIECO 77 MR AM K/10 A is a technical compound based on 100% rPETg (Polyethylene Terephthalate Glycol) from post-industrial mechanical recycling reinforced with 10% carbon fibres. Featuring good mechanical properties and antistaticity (ATEX environments), it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer rPETg

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties
“Green” version On polymer 100% recycled
3D Printing Suitable also for printing from granule
Functional properties Antistaticity (ATEX)/ Electrical conductivity
Granule drying conditions 60°C
Filament extrusion conditionsExtrusion temperature: 235°C – 255°C
Filament drying temperature: 60°C
3D printing conditionsExtruder temperature: 240°C – 260°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF
Richiedi info

Description

LATIECO 77 MR AM K/10 A is a technical compound based on 100% rPETg (Polyethylene Terephthalate Glycol) from post-industrial mechanical recycling reinforced with 10% carbon fibres. Featuring good mechanical properties and antistaticity (ATEX environments), it is optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer rPETg

Fillers/Reinforcements Carbon fibers

Mechanical properties Improved mechanical properties
“Green” version On polymer 100% recycled
3D Printing Suitable also for printing from granule
Functional properties Antistaticity (ATEX)/ Electrical conductivity
Granule drying conditions 60°C
Filament extrusion conditionsExtrusion temperature: 235°C – 255°C
Filament drying temperature: 60°C
3D printing conditionsExtruder temperature: 240°C – 260°C
Bed temperature: 70°C
Recommended Nozzle: steel nozzle
Cooling: OFF
Richiedi info

Additional information

Disponibile in

Polimero base

Filler/rinforzi

Versione “green”

Proprietà meccaniche

Proprietà funzionali

Stampa 3D

Categoria

, ,

RequestDataSheet

Download

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds