Skip to content Skip to footer

LATIECO 7787 MR AM UV A

$1.00

LATIECO 7787 MR AM UV A is a technical compound based on a PETg/rPC (Polyethylene Terephthalate Glycol/Polycarbonate) blend 100% post-industrial mechanical recycling. UV-stabilised, it has good mechanical resilience, good dimensional stability and improved thermal resistance compared to PETg. Optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PETg/rPC

Fillers/Reinforcements Unfilled

Mechanical properties Improved mechanical properties
Chemical-physical properties UV-stabilised
Thermal properties Improved thermal resistance
“Green” version On polymer 100% recycled
3D Printing Suitable also for printing from granule, Good dimensional stability
Granule drying conditions 70°C
Filament extrusion conditions Extrusion temperature: 250°C – 260°C
Filament drying temperature: 70°C
3D printing conditions Extruder temperature: 250°C – 260°C
Bed temperature: 70°C
Cooling: OFF
Richiedi info
SKU: 55410BA Categories: , , Product ID: 25894

Description

LATIECO 7787 MR AM UV A is a technical compound based on a PETg/rPC (Polyethylene Terephthalate Glycol/Polycarbonate) blend 100% post-industrial mechanical recycling. UV-stabilised, it has good mechanical resilience, good dimensional stability and improved thermal resistance compared to PETg. Optimised for both 3D printing from filament (FFF) and direct 3D printing from granule (FGF).

Base polymer PETg/rPC

Fillers/Reinforcements Unfilled

Mechanical properties Improved mechanical properties
Chemical-physical properties UV-stabilised
Thermal properties Improved thermal resistance
“Green” version On polymer 100% recycled
3D Printing Suitable also for printing from granule, Good dimensional stability
Granule drying conditions 70°C
Filament extrusion conditions Extrusion temperature: 250°C – 260°C
Filament drying temperature: 70°C
3D printing conditions Extruder temperature: 250°C – 260°C
Bed temperature: 70°C
Cooling: OFF
Richiedi info

Additional information

Disponibile in

Polimero base

Filler/rinforzi
Versione “green”

Proprietà termiche

Proprietà fisiche

Proprietà meccaniche

Stampa 3D

,

Categoria

,

RequestDataSheet

Download

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds