Skip to content Skip to sidebar Skip to footer

Structural

To close the gap in mechanical performance compared to injection-moulded parts, reinforcements such as glass or carbon fibres are required. Thus AM structural materials are born, reinforced with up to 20% fibre (for filament) and up to 50% fibre (for direct printing from granule). Endowed with exceptional dimensional stability, they are available on any base resin, from PLA and PA to PPS or PEEK.


Category +

Base polymer +

Fillers/Reinforcements +

Chemical-physical properties +

Functional properties +

Mechanical properties +

Thermal properties +

3D Printing +

"Green" version +

Suitability +

Showing all 16 results

  • LAPEX A AM K/20

    PES (Polyetheresulphone) reinforced carbon fibre | Compound for FFF and FGF 3D printing | Structural | High temperature resistant | Antistatic | Self-extinguishing

    $1.00
  • LARTON AM K/10

    PPS (Polyphenylene Sulphide) reinforced carbon fibre | Compound for FFF and FGF 3D printing | Structural | High temperature resistant | Self-extinguishing | Antistatic | Chemically resistant

    $1.00
  • LARTON AM K/15

    PPS (Polyphenylene Sulphide) reinforced carbon fibre | Compound for FFF and FGF 3D printing | Structural | High temperature resistant | Self-extinguishing | Antistatic | Chemically resistant

    $1.00
  • LARTON AM K/30

    PPS (Polyphenylene Sulphide) reinforced carbon fibre | FGF 3D printing compound | Structural | High temperature resistant | Self-extinguishing | Antistatic | Chemically resistant

    $1.00
  • LASTANE 50 AM K/20

    TPU (Polyurethane) reinforced carbon fibre | Compound for FFF 3D printing | Structural | Antistatic

    $1.00
  • LASTILAC RT AM K/10

    ABS (Acrylonitrile Butadiene Styrene) reinforced carbon fibre | Compound for FFF 3D printing | Structural | Antistatic

    $1.00
  • LASTILAC S AM K/10

    ASA (Acrylonitrile Styrene Acrylate) carbon-fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic | UV-stable

    $1.00
  • LATAMID 12 AM H2 K/15

    PA12 (Polyamide 12) carbon fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic | Low moisture absorption | Chemically resistant

    $1.00
  • LATAMID SP1 AM K/15

    PA6.10 (Polyamide 6.10) carbon fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic | Low moisture absorption

    $1.00
  • LATENE EP 3 AM K/20

    PP (Polypropylene) carbon-fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic | Non-hygroscopic | Chemically resistant | Low temperature resistant

    $1.00
  • LATER G AM K/10

    PETg (polyethylene terephthalate-glycol) carbon-fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic

    $1.00
  • LATER G HT AM K/10

    PETg (polyethylene terephthalate-glycol) reinforced with carbon fibre | Compound for FFF and FGF 3D printing | Structural | Antistatic | Improved thermal resistance

    $1.00
  • LATER G HT AM K/15

    PETg (polyethylene terephthalate-glycol) reinforced carbon fibre | Compound for FFF and FGF 3D printing | Structural | Antistatic | Improved thermal resistance

    $1.00
  • LATIBLEND 7587 AM K/10

    Carbon fibre reinforced PC/PBT (Polycarbonate/Polybutylene terephthalate) blend | Compound for FFF and FGF 3D printing | Structural | Antistatic

    $1.00
  • LATIECO 7587 MR AM UV K/30 E

    Partially recycled, carbon-fibre reinforced PC/PBT (polycarbonate/polybutylene terephthalate) blend | FGF 3D printing compound | Structural | Antistatic | UV-stabilised

    $1.00
  • LATIECO 77 MR AM K/10 A

    rPETg (polyethylene terephthalate-glycol) 100% recycled carbon fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic

    $1.00

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds