Skip to content Skip to sidebar Skip to footer

Green/Sustainable


Category +

Base polymer +

Fillers/Reinforcements +

Chemical-physical properties +

Functional properties +

Mechanical properties +

Thermal properties +

3D Printing +

"Green" version +

Suitability +

Showing all 15 results

  • LATIECO 7587 MR AM UV K/30 E

    Partially recycled, carbon-fibre reinforced PC/PBT (polycarbonate/polybutylene terephthalate) blend | FGF 3D printing compound | Structural | Antistatic | UV-stabilised

    $1.00
  • LATIECO 77 MR AM A

    rPETg (polyethylene terephthalate-glycol) standard 100% recycled | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIECO 77 MR AM K/10 A

    rPETg (polyethylene terephthalate-glycol) 100% recycled carbon fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic

    $1.00
  • LATIECO 7787 MR AM UV A

    PETg/rPC (polyethylene terephthalate-glycol/polycarbonate) blend 100% recycled | Compound for FFF and FGF 3D printing | UV-stabilised | Colourable

    $1.00
  • LATIECO 87/24 MR AM A

    rPC (Polycarbonate) standard 100% recycled | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIECO 87/24 MR AM UV V0 A

    rPC (Polycarbonate) 100% recycled with self-extinguishing additive | Compound for FFF and FGF 3D printing | Self-extinguishing | UV-stabilised | Colourable

    $1.00
  • LATIGEA B20 AM

    PLA (Polylactic Acid) standard 100% biobased | Compound for FFF and FGF 3D printing | Good transparency | Colourable

    $1.00
  • LATIGEA B20 AM M9

    PLA (Polylactic Acid) biobased | Compound for FFF 3D printing | Optimised for fast printing | Colourable

    $1.00
  • LATIGEA B20 AM UVH

    PLA (polylactic acid) biobased | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Improved heat resistance after annealing | Colourable

    $1.00
  • LATIGEA B20 AM UVH L10/15

    Biobased PLA (polylactic acid) filled with wood flour | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Wood effect | Improved heat resistance after annealing

    $1.00
  • LATIGEA B20 AM UVH TES/10

    PLA (polylactic acid) biobased with mineral fillers | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Aesthetic and colourable | Improved heat resistance after annealing

    $1.00
  • LATIGEA B20 AM UVHE92 K/15

    PLA (polylactic acid) biobased carbon-fibre reinforced | Compound for FFF 3D printing | Structural | Antistatic | UV-stabilised

    $1.00
  • LATIGRAY B01-01 AM CX/35 F1

    PLA (Polylactic Acid) biobased filled with X-ray detectable filler | FFF 3D printing compound | Radiopaque | suitable for food contact

    $1.00
  • LATIGRAY B01-01 AM CX/70 F3

    Bio-based PLA (Polylactic Acid) loaded with X-ray detectable filler | Compound for FFF 3D printing | High radiopacity | suitable for medical applications

    $1.00
  • LATILUB B01 AM-02S

    PLA (Polylactic acid) biobased with silicone lubricant | Compound for FFF 3D printing | Self-lubricating | Colourable

    $1.00

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds