Skip to content Skip to sidebar Skip to footer

Improved thermal resistance


Category +

Base polymer +

Fillers/Reinforcements +

Chemical-physical properties +

Functional properties +

Mechanical properties +

Thermal properties +

3D Printing +

"Green" version +

Suitability +

Showing all 12 results

  • LATER G HT AM

    PETg (polyethylene terephthalate-glycol) with improved heat resistance | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATER G HT AM F1

    PETg (Polyethylene Terephthalate Glycol) with improved heat resistance | Suitable for food contact | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATER G HT AM K/10

    PETg (polyethylene terephthalate-glycol) reinforced with carbon fibre | Compound for FFF and FGF 3D printing | Structural | Antistatic | Improved thermal resistance

    $1.00
  • LATER G HT AM K/15

    PETg (polyethylene terephthalate-glycol) reinforced carbon fibre | Compound for FFF and FGF 3D printing | Structural | Antistatic | Improved thermal resistance

    $1.00
  • LATIECO 7787 MR AM UV A

    PETg/rPC (polyethylene terephthalate-glycol/polycarbonate) blend 100% recycled | Compound for FFF and FGF 3D printing | UV-stabilised | Colourable

    $1.00
  • LATIGEA B20 AM

    PLA (Polylactic Acid) standard 100% biobased | Compound for FFF and FGF 3D printing | Good transparency | Colourable

    $1.00
  • LATIGEA B20 AM M9

    PLA (Polylactic Acid) biobased | Compound for FFF 3D printing | Optimised for fast printing | Colourable

    $1.00
  • LATIGEA B20 AM UVH

    PLA (polylactic acid) biobased | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Improved heat resistance after annealing | Colourable

    $1.00
  • LATIGEA B20 AM UVH L10/15

    Biobased PLA (polylactic acid) filled with wood flour | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Wood effect | Improved heat resistance after annealing

    $1.00
  • LATIGEA B20 AM UVH MK/10

    PLA (polylactic acid) biobased carbon-fibre reinforced | Compound for FFF 3D printing | Structural | Antistatic | UV-stabilised

    $1.00
  • LATIGEA B20 AM UVH TES/10

    PLA (polylactic acid) biobased with mineral fillers | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Aesthetic and colourable | Improved heat resistance after annealing

    $1.00
  • LATIGEA B20 AM UVHE92 K/15

    PLA (polylactic acid) biobased carbon-fibre reinforced | Compound for FFF 3D printing | Structural | Antistatic | UV-stabilised

    $1.00

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds