Skip to content Skip to sidebar Skip to footer

Engineering


Category +

Base polymer +

Fillers/Reinforcements +

Chemical-physical properties +

Functional properties +

Mechanical properties +

Thermal properties +

3D Printing +

"Green" version +

Suitability +

Showing all 18 results

  • LASTANE 50 AM

    TPU (Polyurethane) | Compound for FFF 3D printing | Maximum resilience | Colourable

    $1.00
  • LASTILAC S AM G/10

    ASA (Acrylonitrile Styrene Acrylate) reinforced with glass fibre | Compound for FFF and FGF 3D printing | Engineering | Improved mechanics | UV stable | Colourable

    $1.00
  • LATAMID 12 AM H2 G/10

    PA12 (Polyamide 12) glass fibre reinforced | Compound for FFF and FGF 3D printing | Engineering | Improved mechanics | Low moisture absorption | Chemically resistant | Colourable

    $1.00
  • LATAMID 12 AM H2 K/05

    PA12 (Polyamide 12) carbon fibre reinforced | Compound for FFF and FGF 3D printing | Engineering | Improved mechanics | Low moisture absorption | Chemically resistant

    $1.00
  • LATAMID SP1 AM S/10

    PA6.10 (Polyamide 6.10) glass sphere filled | Compound for FFF and FGF 3D printing | Engineering | Low moisture absorption | Dimensionally stable | Wear-resistant | Colourable

    $1.00
  • LATAMID SP4 AM MK/15

    PA6.66 (modified copolymer polyamide) reinforced short carbon fibre | Compound for FFF and FGF 3D printing | Engineering | Dimensionally stable | Aesthetic | Sandable

    $1.00
  • LATENE EP 3 AM M/20

    PP (Polypropylene) loaded with short glass fibre | Compound for FFF and FGF 3D printing | Engineering | Non-hygroscopic | Chemically resistant | Low temperature resistant | Colourable

    $1.00
  • LATER G AM UVH TES/10

    PETg (polyethylene terephthalate-glycol) with mineral fillers | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Aesthetic and colourable | Improved dimensional stability

    $1.00
  • LATER G HT AM

    PETg (polyethylene terephthalate-glycol) with improved heat resistance | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATER G HT AM F1

    PETg (Polyethylene Terephthalate Glycol) with improved heat resistance | Suitable for food contact | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATER G HT1 AM

    PETg (polyethylene terephthalate-glycol) with improved heat resistance | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIBLEND 7587 AM

    Blend PC/PBT (Polycarbonate/Polybutylene terephthalate) | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIBLEND 7587 AM MK/15

    PC/PBT (Polycarbonate/Polybutylene terephthalate) blend reinforced with short carbon fibre | Compound for FFF and FGF 3D printing | Improved aesthetics

    $1.00
  • LATIECO 7787 MR AM UV A

    PETg/rPC (polyethylene terephthalate-glycol/polycarbonate) blend 100% recycled | Compound for FFF and FGF 3D printing | UV-stabilised | Colourable

    $1.00
  • LATIECO 87/24 MR AM A

    rPC (Polycarbonate) standard 100% recycled | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIGEA B20 AM UVHE92 K/15

    PLA (polylactic acid) biobased carbon-fibre reinforced | Compound for FFF 3D printing | Structural | Antistatic | UV-stabilised

    $1.00
  • LATILON 28 AM

    PC (Polycarbonate) standard | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATILON 28 AM MK/20

    PC (Polycarbonate) reinforced short carbon fibre | Compound for FFF and FGF 3D printing | Improved aesthetics

    $1.00

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds