Skip to content Skip to sidebar Skip to footer

Good thermal resistance


Category +

Base polymer +

Fillers/Reinforcements +

Chemical-physical properties +

Functional properties +

Mechanical properties +

Thermal properties +

3D Printing +

"Green" version +

Suitability +

Showing all 13 results

  • LATAMID SP1 AM K/15

    PA6.10 (Polyamide 6.10) carbon fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic | Low moisture absorption

    $1.00
  • LATAMID SP4 AM MK/15

    PA6.66 (modified copolymer polyamide) reinforced short carbon fibre | Compound for FFF and FGF 3D printing | Engineering | Dimensionally stable | Aesthetic | Sandable

    $1.00
  • LATIBLEND 7587 AM

    Blend PC/PBT (Polycarbonate/Polybutylene terephthalate) | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIBLEND 7587 AM K/10

    Carbon fibre reinforced PC/PBT (Polycarbonate/Polybutylene terephthalate) blend | Compound for FFF and FGF 3D printing | Structural | Antistatic

    $1.00
  • LATIBLEND 7587 AM MK/15

    PC/PBT (Polycarbonate/Polybutylene terephthalate) blend reinforced with short carbon fibre | Compound for FFF and FGF 3D printing | Improved aesthetics

    $1.00
  • LATICONTHER SP4 AM CP1/30

    PA6.10 (Polyamide 6.10) filled with ceramic fillers | Compound for FFF and FGF 3D printing | Thermally conductive | Electrically insulating

    $1.00
  • LATIECO 7587 MR AM UV K/30 E

    Partially recycled, carbon-fibre reinforced PC/PBT (polycarbonate/polybutylene terephthalate) blend | FGF 3D printing compound | Structural | Antistatic | UV-stabilised

    $1.00
  • LATIECO 87/24 MR AM A

    rPC (Polycarbonate) standard 100% recycled | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATIECO 87/24 MR AM UV V0 A

    rPC (Polycarbonate) 100% recycled with self-extinguishing additive | Compound for FFF and FGF 3D printing | Self-extinguishing | UV-stabilised | Colourable

    $1.00
  • LATILON 28 AM

    PC (Polycarbonate) standard | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATILON 28 AM MK/20

    PC (Polycarbonate) reinforced short carbon fibre | Compound for FFF and FGF 3D printing | Improved aesthetics

    $1.00
  • LATILON 28 AM-V0

    PC (Polycarbonate) with self-extinguishing additives | Compound for FFF and FGF 3D printing | Self-extinguishing | UV-stabilised | Colourable

    $1.00
  • LATISTAT 87/28-06 AM

    PC (Polycarbonate) additivated Conductive carbon | Compound for 3D printing FFF | Antistatic

    $1.00

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds