Skip to content Skip to sidebar Skip to footer

PETg


Category +

Base polymer +

Fillers/Reinforcements +

Chemical-physical properties +

Functional properties +

Mechanical properties +

Thermal properties +

3D Printing +

"Green" version +

Suitability +

Showing all 9 results

  • LATER G AM

    PETg (polyethylene terephthalate-glycol) standard | Compound for FFF and FGF 3D printing | Colourable

    $1.00
  • LATER G AM K/10

    PETg (polyethylene terephthalate-glycol) carbon-fibre reinforced | Compound for FFF and FGF 3D printing | Structural | Antistatic

    $1.00
  • LATER G AM MDT05-01 F1

    PETg (Polyethylene Terephthalate Glycol) filled with reprocessable fillers | FFF 3D printing compound | Metal Detectable | Suitable for food contact

    $1.00
  • LATER G AM UVH TES/10

    PETg (polyethylene terephthalate-glycol) with mineral fillers | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Aesthetic and colourable | Improved dimensional stability

    $1.00
  • LATER G AM-V0HF

    PETg (Polyethylene Terephthalate Glycol) with halogen-free self-extinguishing additive | Compound for FFF and FGF 3D printing | Self-extinguishing V0 | Colourable

    $1.00
  • LATER G AM-V0HF U6

    PETg (Polyethylene Terephthalate Glycol) with halogen-free self-extinguishing additive | Compound for FFF and FGF 3D printing | Self-extinguishing V0 | UV-stabilised | Colourable

    $1.00
  • LATILUB 77 AM 10T

    PETg (Polyethylene terephthalate-glycol) additivated PTFE | Compound for FFF 3D printing | Self-lubricating

    $1.00
  • LATIOHM 77-01 AM CNT

    PETg (Polyethylene Terephthalate-Glycol) Additivated Carbon Nanotubes | Compound for FFF 3D Printing | Electrically Conductive

    $1.00
  • LATIOHM 77-09 AM PD02 M/10

    PETg (polyethylene terephthalate-glycol) modified with permanent antistatic additives and reinforced short glass fibre | Compound for FFF 3D printing | Antistatic | Colourable

    $1.00

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds