Skip to content Skip to sidebar Skip to footer

Natural (white)


Category +

Base polymer +

Fillers/Reinforcements +

Chemical-physical properties +

Functional properties +

Mechanical properties +

Thermal properties +

3D Printing +

"Green" version +

Suitability +

Showing all 7 results

  • LATER G AM UVH TES/10

    PETg (polyethylene terephthalate-glycol) with mineral fillers | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Aesthetic and colourable | Improved dimensional stability

    $1.00
  • LATIGEA B20 AM UVH TES/10

    PLA (polylactic acid) biobased with mineral fillers | Compound for FFF and FGF 3D printing | UV- and hydrolysis-stabilised | Aesthetic and colourable | Improved heat resistance after annealing

    $1.00
  • LATIGRAY B01-01 AM CX/35 F1

    PLA (Polylactic Acid) biobased filled with X-ray detectable filler | FFF 3D printing compound | Radiopaque | suitable for food contact

    $1.00
  • LATIGRAY B01-01 AM CX/70 F3

    Bio-based PLA (Polylactic Acid) loaded with X-ray detectable filler | Compound for FFF 3D printing | High radiopacity | suitable for medical applications

    $1.00
  • LATILUB 77 AM 10T

    PETg (Polyethylene terephthalate-glycol) additivated PTFE | Compound for FFF 3D printing | Self-lubricating

    $1.00
  • LATILUB 87/28 AM 20T

    PC (Polycarbonate) with PTFE additive | Compound for FFF 3D printing | Self-lubricating

    $1.00
  • LATILUB B01 AM-02S

    PLA (Polylactic acid) biobased with silicone lubricant | Compound for FFF 3D printing | Self-lubricating | Colourable

    $1.00

Info


This will close in 0 seconds

Datasheet


This will close in 0 seconds

Iscrizione alla newsletter


This will close in 0 seconds

Subscribe our newsletter


This will close in 0 seconds